Your present location:Home >> news > Industry dynamics

How to choose LED Driver IC?
author:tom2020 Release time:2020-07-27 14:45:22 Read:7
LEDhasestablisheditsunshakablepositioninthebacklightingofportabledevices.Eveninthebacklightingforthelarge-sizedLCDpanel,ithasstartedtochallengethemainstreamCCFL.Inlighting,LEDisespeciallypopularinthem

LED has established its unshakable position in the backlighting of portable devices. Even in the backlighting for the large-sized LCD panel, it has started to challenge the mainstream CCFL. In lighting, LED is especially popular in the market due to its highlighted features like energy-efficiency, environmental friendliness, long lifetime, and low maintenance. The driver circuit is a crucial and integral part of the LED. Whether in lighting, backlighting or the display panel, the choice of the technical architecture of the driver circuit must correspond to specific applications.


The LED lighting mechanism goes as follows: when the forward voltage is applied to both ends, the minority carrier and majority carrier in the semiconductor recombine to release surplus energy, giving off photons。 The main functions of the LED drive circuit are to transfer the AC voltage into a constant power supply and match the voltage and current according to the requirements of LED devices。 Apart from safety need, the LED driver circuit must also include two other basic features:


First, a constant current should be kept as long as it is possible, thus the output current variation is able to be maintained between the range of ±10% especially when the power supply change goes beyond ±15%range. Here are the reasons for having a constant current driver when using LED as the monitor, other lighting devices or backlighting:


1.To prevent the drive current from exceeding the maximum rate and further affecting its reliability.


2.To meet expected brilliance requirements and ensure the color and brilliance homogeneity of each LED.


Second, the driver circuit should keep low power consumption so that the LED system efficiency can remain at a high level.


PWM (Pulse Width Modification) is a traditional light adjusting technology, which uses simple digital pulses to switch on and off LED driver from time to time. The system only needs to supply wide and narrow digital pulses in order to easily change the output for adjusting LED brilliance. The advantage is that the technology is able to provide high quality white light with high efficiency through easy application. But there is a fatal disadvantage: it is susceptible to EMI (electromagnetic interference), sometimes even produces audible noises.


Voltage boost is an important task of the LED driver circuit, divided into two different topological modes, namely, voltage boost via the inductor and charge bump. As the LED is current-driven, and the inductor is most efficient at the moment of current transfer, so the greatest strength of voltage boost via inductor lies in the high efficiency, which can reach 90% if properly designed. However, its weakness is as much remarkable, i.e., strong EMI, which imposes high requirements on systems of telecommunication products such as mobile phones. With the appearance of charge pumps, most mobiles don’t boost voltage via the inductor. Of course, the efficiency of voltage boost via the charge pump is lower than that in the other way.


No matter in lighting or backlighting applications, the product designer has to face the problem of raising the driver transfer efficiency。 To improve the transfer efficiency is not only beneficial for portable products to extend standby time but is also an important means to solve the LED thermal dissipation problem。 In lighting, the use of the high power LED also underlines the problem of enhancing the transfer efficiency。


Be the first to know our new products

Share:

English中文

河北11选5走势图 全民彩票 中华彩票网 欢乐生肖 极速快乐8 欢乐生肖 北京两步彩 大乐购彩票计划群 欢乐生肖 湖北快3开奖